Certifications 2

ManualsBrandsUnbranded ManualsPCB AccessoriesSilcone sealant pasty, spreadable Clear TSE392C Content 82.8 ml

Version: 1.0

Last revised date: 04.07.2019

Supersedes Date: 00.00.0000

TSE392-C

SDS_GB

1/19

SAFETY DATA SHEET

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation

(EU) No. 2015/830

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier

Product name: TSE392-C

1.2 Relevant identified uses of the substance or mixture and uses advised against

Identified uses: Silicone Elastomer

Uses advised against: For industrial use only.

1.3 Details of the supplier of the safety data sheet

Manufacturer/Importer/Distr

ibutor Information

Momentive Performance Materials GmbH

Chempark Leverkusen Gebaeude V7

DE - 51368 Leverkusen

Germany

Contact person

commercial.services@momentive.com

Telephone

General information

00800.4321.1000 (Customer Service Centre)

1.4

Emergency telephone

number

Europe, Israel & All other: +44 (0) 1235239670; Middle East:+44

(0) 1235239671

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

The product has been classified according to the legislation in force.

Classification according to Regulation (EC) No 1272/2008 as amended.

Health Hazards

Serious eye irritation

Category 2

H319: Causes serious eye irritation.

Environmental Hazards

Chronic hazards to the aquatic

environment

Category 3

H412: Harmful to aquatic life with long lasting

effects.

2.2 Label Elements

Signal Words:

Warning

Hazard Statement(s):

H319: Causes serious eye irritation.

H412: Harmful to aquatic life with long lasting effects.

Summary of content (19 pages)

PAGE 1
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 TSE392-C SAFETY DATA SHEET Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 2015/830 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Product name: TSE392-C 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses: Silicone Elastomer Uses advised against: For industrial use only. 1.
PAGE 2
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 TSE392-C Precautionary Statements Prevention: P264: Wash thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. Response: P337+P313: If eye irritation persists: Get medical advice/attention.
PAGE 3
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 TSE392-C , METHOXY TERMINATED 3Aminopropyltri ethoxysilane 0,1 - <1% 919-30-2 213-048-4 01211948047924-0002 No data available. Dibutyltin Dilaurate 0,25 - <1% 77-58-7 201-039-8 01211949606827-0001 1 # Dodecamethyl cyclohexasilox ane 0,1 - <1% 540-97-6 208-762-8 01211951743542-0001 No data available. vPvB Decamethylcy 0,1 - <1% 541-02-6 208-764-9 01No data vPvB clopentasiloxa 2119511367- available.
PAGE 4
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 4.2 Most important symptoms and effects, both acute and delayed: TSE392-C Product may hydrolyse upon contact with body fluids in the gastrointestinal tract to produce additional methanol; therefore, consider the signs/symptoms of methanol poisoning and also observe the known latency period of several days! 4.3 Indication of any immediate medical attention and special treatment needed Hazards: No data available.
PAGE 5
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 TSE392-C Storage conditions: Keep away from sources of ignition - No smoking. Store in original container. 7.2 Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a cool, well-ventilated place. Storage Stability: Material is stable under normal conditions. 7.3 Specific end use(s): No data available. SECTION 8: Exposure controls/personal protection 8.
PAGE 6
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 TSE392-C Eye/face protection: Skin protection Hand Protection: Other: Safety glasses with side-shields conforming to EN166 Advice: This recommendation is valid only for our Product as delivered. If this product will be mixed with other substances you need to contact a supplier of CE approved protective gloves (e.g. KCL GmbH, D-36124 Eichenzell, Tel. 0049 (0) 6659 87300, Fax. 0049 (0) 6659 87155, email: vertrieb@kcl.de).
PAGE 7
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 TSE392-C > 20,5 mm2/s (40 °C) No data available. No data available. Viscosity, kinematic: Explosive properties: Oxidizing properties: SECTION 10: Stability and reactivity 10.1 Reactivity: Material is stable under normal conditions. 10.2 Chemical Stability: Material is stable under normal conditions. 10.3 Possibility of hazardous reactions: Hazardous polymerization does not occur. Avoid contact with: Moisture. 10.
PAGE 8
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.
PAGE 9
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.
PAGE 10
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.
PAGE 11
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 TSE392-C Specified substance(s) CYCLOPENTYLSILAZAN E-AMINOSILOXANE COPOLYMER, METHOXY TERMINATED 3Aminopropyltriethoxysilan e Dibutyltin Dilaurate Dodecamethylcyclohexas iloxane Decamethylcyclopentasil oxane No data available. No data available. No data available. No data available. No data available. Specific Target Organ Toxicity - Single Exposure Product: No data available.
PAGE 12
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 3Aminopropyltriethoxysilan e Dibutyltin Dilaurate Dodecamethylcyclohexas iloxane Decamethylcyclopentasil oxane Other effects: TSE392-C No data available. No data available. No data available. No data available. No data available. SECTION 12: Ecological information 12.
PAGE 13
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.
PAGE 14
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 CYCLOPENTYLSILAZAN E-AMINOSILOXANE COPOLYMER, METHOXY TERMINATED 3Aminopropyltriethoxysilan e Dibutyltin Dilaurate Dodecamethylcyclohexas iloxane Decamethylcyclopentasil oxane BOD/COD Ratio Product Specified substance(s) CYCLOPENTYLSILAZAN E-AMINOSILOXANE COPOLYMER, METHOXY TERMINATED 3Aminopropyltriethoxysilan e Dibutyltin Dilaurate Dodecamethylcyclohexas iloxane Decamethylcyclopentasil oxane 12.
PAGE 15
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 Decamethylcyclopentasilox ane 12.5 Results of PBT and vPvB assessment: CYCLOPENTYLSILAZANEAMINOSILOXANE COPOLYMER, METHOXY TERMINATED 3-Aminopropyltriethoxysilane Dibutyltin Dilaurate Dodecamethylcyclohexasiloxane TSE392-C No data available. vPvB: very persistent and very bioaccumulative substance. No data available.
PAGE 16
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 General information: Disposal methods: TSE392-C The generation of waste should be avoided or minimized wherever possible. Do not discharge into drains, water courses or onto the ground. See Section 8 for information on appropriate personal protective equipment. Can be incinerated when in compliance with local regulations. SECTION 14: Transport information ADR Not regulated. ADN Not regulated. RID Not regulated. IMDG Not regulated.
PAGE 17
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 TSE392-C Chemical name Dodecamethylcyclohexasiloxane Decamethylcyclopentasiloxane CAS-No. 540-97-6 541-02-6 Concentration 0 - <=0,2% 0 - <=0,2% Regulation (EC) No. 1907/2006 Annex XVII Substances subject to restriction on marketing and use: Chemical name Dibutyltin Dilaurate Decamethylcyclopentasiloxane CAS-No.
PAGE 18
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 REACH: TSE392-C If purchased from Momentive Performance Materials GmbH in Leverkusen, Germany, all substances in this product have been registered by Momentive Performance Materials GmbH or upstream in our supply chain or are exempt from registration under Regulation (EC) No 1907/2006 (REACH). For polymers, this includes the constituent monomers and other reactants. Remarks: None.
PAGE 19
Version: 1.0 Last revised date: 04.07.2019 Supersedes Date: 00.00.0000 TSE392-C Disclaimer: Notice to reader Unless otherwise specified in section 1.2, Momentive Products are intended for industrial application only. They are not intended for specific medical applications, neither for longlasting (> 30 days) implantation into the human body, injected or directly ingested, nor for the manufacture of multiple usable contraceptives.