Warranty

S90-100-20, 1-TON HAND CHAIN

HOIST WITH 20' LIFT

101912

JET® S90 Series hand chain hoists were designed with reliability and durability to

perform in light-duty industrial applications. Easily maintained and serviced, the

JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15,

20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade

hoist.

Safety

The Weston style double ratchet pawl brake design splits the load to opposite

sides of the ratchet gear for greater load security and increased safety

Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly

stretch to indicate an overload situation

Durability

Grade 80 black oxide coated load chain for added durability

Intended for the harshest environments, the heat treated load plates and case

hardened corrosive resistant internal parts extend the life of the hoist

NEW! Secured with Allen screws and lock nuts, the cast-steel safety latches are

more durable than stamped steel latches and will not bend out of compliance

with lifting regulations

Needle bearings support the load sheave to increase efficiency and promote

smooth operation

Impact resistant all steel construction for added durability and protection

The smaller body and lightweight design are ideal for confined areas and low

headroom applications

Standards

This product complies with ANSI / ASME B30.16 and HST-2 Standards

Load tested to 125% of capacity with certificate

FEATURES

JET RED ASSURANCE LIFETIME WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United

States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you

in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area

call 1-800-274-6848.

PAGE 1
S90-100-20, 1-TON HAND CHAIN HOIST WITH 20' LIFT 101912 JET® S90 Series hand chain hoists were designed with reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade hoist.
PAGE 2
S90-100-20, 1-TON HAND CHAIN HOIST WITH 20' LIFT 101912 SPECIFICATIONS Load Capacity (Tons) 1 Lift (Ft.) 20 Overload Protection No Headroom (In.) 12 Hand Chain Overhaul (Ft.) to Lift Load 1Ft. 53 Hand Chain Pull Force (LBF) to Move Load 60 Load Chain Dimensions (Mm.) 6 x 18 Number of Falls 1 Weight (Lbs.
PAGE 3
S90-100-20, 1-TON HAND CHAIN HOIST WITH 20' LIFT 101912 FULL SERIES STOCK NO MODEL NO LOAD CAPACITY (TONS) LIFT (FT.) OVERLOAD PROTECTION HEADROOM (IN.) HAND CHAIN OVERHAUL (FT.) TO LIFT LOAD 1FT.
PAGE 4
PAGE 5
S90-100-20, 1-TON HAND CHAIN HOIST WITH 20' LIFT 101912 FULL SERIES STOCK NO MODEL NO LOAD CAPACITY (TONS) LIFT (FT.) OVERLOAD PROTECTION HEADROOM (IN.) HAND CHAIN OVERHAUL (FT.) TO LIFT LOAD 1FT.