Installation Guide

2
ZIP SYSTEM
®
SHEATHING AND TAPE
INSTALLATION MANUAL - ROOF
HUB 81824 REV 9/18
ATTENTION: This installation guide is intended to provide
general information for the designer and end user. The
following guidelines will help you safely and properly install
the ZIP System
®
roof and wall wall sheathing. We urge you,
and anyone installing this product, to read these guidelines
in order to minimize any risk of safety hazards and to prevent
voiding any applicable warranties. This manual is a general
installation guide and does not cover every installation
condition. Proper installation shall be deemed to mean the
most restrictive requirement specified by Huber Engineered
Woods (HEW), local building code, engineer or architect of
record or other authority having jurisdiction. You are fully
and solely responsible for all safety requirements and code
compliance. For additional information contact Huber
Engineered Woods LLC.
10925 David Taylor Drive, Suite 300
Charlotte, NC 28262
Phone: [phone] // Fax: [phone]