Installation Guide

11
ZIP SYSTEM
®
SHEATHING AND TAPE
INSTALLATION MANUAL - ROOF
HUB 81824 REV 9/18
ZIP SYSTEM
®
SHEATHING
// GENERAL INFORMATION & COMPATIBILITY
PARAPET WALL TERMINATION
ZIP System
®
sheathing used as parapet wall sheathing is
compatible with TPO and EPDM built-up roofing membrane
terminations. It is recommended to transition from the top of
the built-up membrane to the surface of ZIP System
®
sheathing
with a piece of ZIP System
™
tape or ZIP System
™
liquid
flash. Refer to roofing membrane manufacturer’s installation
instructions to ensure the roofing membrane is firmly attached
to the wall sheathing. Please note, a polyurethane or solvent
based adhesive should be used when adhering the built-up
membrane to ZIP System
®
sheathing, and that all panel seams
should be taped prior to installing the built-up membrane over
ZIP System
®
sheathing.
TOOLS
Common Recommended
- Pneumatic nail gun - Flush nail collars
- Framing hammer - Air line regulators
- Air compressor
- Speed square
- Tape Roller
- PPE