Datasheet

BCM SENSOR TECHNOLOGIES BVBA
Brechtsebaan 2
B-2900 Schoten - Antwerpen, BELGIUM
Industriepark Zone 4,
Tel.: [phone]
Fax: [phone]
website: www.bcmsensor.com
email: [e-mail]
Technical Data
Linear Strain Gauges
for Bending Beam Force Transducers
EKF-350-0.8AA-(11)-O-SD
EKF-350-0.8AA-(23)-O-SD
Gauge
Length
Grid
Width
Backing
Width
Backing
Length
1.4
0.8
2.6
3.1
0.031
0.055
0.102
0.122
Suggested Ordering Codes
Dimensions in mm and inch
Variants: *1K*3-350-0.8AA-(*7)-*9-*10
AA Pattern Single Grid Linear Strain Gauges: Karma, 0.8mm, 350Ω
EKF-350-1.1AA-(11)-O-SD
EKF-350-1.1AA-(23)-O-SD
Gauge
Length
Grid
Width
Backing
Width
Backing
Length
1.0
1.1
2.9
2.0
0.043
0.039
0.114
0.079
Suggested Ordering Codes
Dimensions in mm and inch
Variants: *1K*3-350-1.1AA-(*7)-*9-*10
AA Pattern Single Grid Linear Strain Gauges: Karma, 1.1mm, 350Ω
Option *1
Gauge Type
E: encapsulated
O: open-face
Option *3
F (-30 ~ +80°C),
I (-85 ~ +150°C),
B (-45 ~ +150°C),
A (-195 ~ +200°C),
L (-55 ~ +150°C).
Backing Material
(Working Temp.)
Option *7
STC or EMC
11 or M11: martensitic steel (e.g.,
mild steel, 17-4PH SS)
16 or M16: austenitic steel (e.g., 304 SS),
or copper
23 or M23: aluminum
Option *9
Creep Code
O
Option *10
Solder-pad Finishing
SP: naked solder pads
SD: solder dots
RL: round copper leads
FR: flat copper leads
CW: enamel insulated
copper wires
Option *1
Gauge Type
E: encapsulated
O: open-face
Option *3
F (-30 ~ +80°C),
I (-85 ~ +150°C),
B (-45 ~ +150°C),
A (-195 ~ +200°C),
L (-55 ~ +150°C).
Backing Material
(Working Temp.)
Option *7
STC or EMC
11 or M11: martensitic steel (e.g.,
mild steel, 17-4PH SS)
16 or M16: austenitic steel (e.g., 304 SS),
or copper
23 or M23: aluminum
Option *9
Creep Code
N7
Option *10
Solder-pad Finishing
SP: naked solder pads
SD: solder dots
RL: round copper leads
FR: flat copper leads
CW: enamel insulated
copper wires
Schematic
Diagram:
Schematic
Diagram:
2/7