User manual

2
TRANSFERRING YOUR MUSIC TO YOUR COMPUTER
Once you have installed the software, you can start recording. Open EZ Vinyl/Tape Converter by going to
Start
 All Programs  MixMeister  EZ Vinyl Converter or open EZ Audio Converter by accessing your
Applications menu.
STEP 1
Once you start the software, you will see the screen
shown on the right.
Connect a USB cable from the USB device to an
available USB port on your computer.
Once the USB device is connected, click Next.
STEP 2
You will see the screen shown on the right.
Locate the beginning of the section you would like to
record. We recommend checking your levels before you
begin recording and adjust the gain level control on your
device accordingly. Ensure you are getting
The software will split tracks automatically when it detects
silence in the music. This can have unexpected results
depending on the music. To split the tracks manually,
uncheck the box labeled “Automatically split recording
into separate tracks.” (Note: This auto-track feature is
only available for PC users.)
When you are ready to start recording, click Record and immediately play your music.
STEP 3
You are now recording. You should be hearing the audio
from the device through your computer’s speakers and
seeing the audio meters move.
If you chose to manually split your recording into tracks,
you will see a “New Track” button. You can use this
button to demarcate the beginning of a new track.
When you have finished recording, click Next to proceed
to the next step.