Data Sheet

6
Rev. 2/22
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
Reelmaster
®
5610 Specifications
*
The Reelmaster 5610 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
REELMASTER 5610 4WD, MODEL 03678 REELMASTER 5610-D 4WD, MODEL 03679
ENGINE
Kubota
®
4-cylinder, liquid cooled, diesel engine. 44.2 hp (33 kW) @ 3000 rpm.
Yanmar® 3-cylinder, liquid cooled, turbo-diesel engine. 43.5 hp (32.4 kW), 74.4
ft. lbs. (105 Nm) torque, 1.64 liter displacement. Tier 4 Final Compliant.
LUBRICATION
Pressurized lubrication system with 5.0 quart (4.7 liter) capacity.
FUEL FILTER
Replaceable spin-on fuel filter/water separator.
AIR CLEANER
Heavy duty three-stage, radial seal air cleaner with restriction indicator.
COOLING
Rear mounted radiator with industrial tube and fin construction, 6.3 fins per inch, 10.0 quart (9.5 liter) capacity.
FUEL TANK CAPACITY
13.5 gallon (51.1 liter) capacity. Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend).
HYDRAULIC OIL CAPACITY
9.0 gallon (34.1 liter) capacity.
TRACTION DRIVE
Front drive wheels powered by a hydrostatic pump with individual wheel
motors. All-wheel drive optional with CrossTrax® All-Wheel Drive system,
which transfers power from the front wheels to the opposite rear wheels via
independent rear wheel motors.
CrossTrax® All-Wheel Drive system standard, which transfers power from the
front wheels to the opposite rear wheels via independent rear wheel motors.
GROUND SPEED
0-10 mph (0-16 km/hr) forward transport; 0-8 mph (0-12.8 km/hr) mow; 0-4 mph (0-6.4 km/h) reverse.
TIRES
Front traction tires: 26.5 x 14-12 turf tires; Rear steer tires: 20 x 12-10.
MAIN FRAME
High strength steel frame with welded construction.
BRAKES
Individual left and right drum-type front wheel brakes. Brakes may be actuated for service braking via left foot pedal. Integrated foot pedal lock provides parking
brake. Dynamic braking through hydrostatic traction drive system.
STEERING
Rear wheel, power steering with an independent hydraulic pump and circuit.
GAUGES
InfoCenter
TM
onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, indicates fuel level, coolant temp., low oil pressure,
alternator, engine hours, engine rpm, voltage, reel speed, backlap speed, glow indicator (diesel), lift/lower indicator.
CONTROLS
Single foot-operated traction pedal, foot actuated mow speed limiter, foot actuated service and parking brake. Hand-operated key ignition switch, throttle, cutting
unit raise/lower joystick, cutting unit engage switch, and LED headlight switch, all positioned on right hand pivoting control console.
ELECTRICAL & INTERLOCKS
Heavy duty 12-volt battery, 570 CCA, 40 amp alternator. Electronic control unit is a microprocessor based, solid state control unit with diagnostic capabilities. Traction
pedal, parking brake, operator presence in seat, and cutting unit engage/disengage safety interlock switches.
REEL DRIVE
Reel drive circuit is split independently for front and rear cutting units. Hydraulic functions controlled by an integrated hydraulic control block. Reel speeds are
electronically adjustable in nine incremental settings. Standard on-board backlapping.
CUTTING UNIT LIFT/LOWER
Front and rear cutting unit lift/lower is sequenced for uniform starting and ending points.
SEAT
Deluxe high back suspension seat with fore, aft, height and weight adjustment.
ROPS
Standard with seat belt
HEIGHT
63" (160 cm) seat top, 85.5" (217.2 cm) top of ROPS.
LENGTH (2WD)
111" (281.9 cm)
WHEEL BASE
60" (152.4 cm)
OPERATIONAL WIDTH
116" (288.3 cm)
TRANSPORT WIDTH
92" (233.7 cm)
WEIGHT
2,756 lbs. (1,276 kg) (2WD), 2,866 lbs. (1,326 kg) (4WD)
CERTIFICATION
Complies with ANSI B71.4-2004 and CE requirements. Certain machine configurations require rear weight kits for standards compliance, see Operator’s Manual for details.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.