Data Sheet

2
Rev. 2/21
The Reelmaster 5010-H is manufactured
in Tomah, WI ISO 9002 Certified Plant.
* Specifications and design subject to change without notice. Products depicted in this literature are
for demonstration purposes only. Actual products offered for sale may vary in use, design, required
attachments and safety features. See distributor for details on all warranties.
Reelmaster
®
5010-H Specifications
*
REELMASTER 5010-H, MODEL 03674
POWER SYSTEM
Tier 4 compliant 24.8 hp (18.5 kW) Kubota
®
3-cylinder, liquid-cooled, diesel engine. Four 12V Absorbed Glass Mat (AGM), sealed, maintenance-free lead carbon batteries.
LUBRICATION
Pressurized lubrication system with 3.5 quart (3.3 liter) capacity.
FUEL FILTER
Replaceable spin-on fuel filter/water separator.
COOLING
Rear mounted radiator with industrial tube and fin construction, 6 fins per inch, 5.5 quart (5.2 liter) system capacity.
FUEL TANK CAPACITY
14 gallons (53 liters), diesel fuel.
TRACTION DRIVE
Front drive wheels powered by a hydrostatic pump with individual wheel motors. All-wheel drive optional with CrossTrax® All-Wheel Drive system, which transfers
power from the front wheels to the opposite rear wheels via independent rear wheel motors.
GROUND SPEED
0-10 mph (0-16 km/h) forward transport; 0-8 mph (0-12.8 km/h) mow; 0-4 mph (0-6.4 km/h) reverse.
TIRES
Front traction tires: 26.5 x 14-12; Rear steer tires: 20 x 12-10.
MAIN FRAME
High strength steel frame with welded construction.
BRAKES
Individual left and right drum-type front wheel brakes. Brakes may be actuated for service braking via left foot pedal. Integrated foot pedal lock provides parking
brake. Dynamic braking through hydrostatic traction drive system.
STEERING
Rear wheel, power steering with and independent hydraulic pump and circuit.
GAUGES
InfoCenter
TM
onboard LCD display shows gauges, alerts, faults, service reminders, electrical systems diagnostics, indicates fuel level, coolant temp., low oil pressure,
alternator, engine hours, engine rpm, voltage, reel speed, backlap speed, glow indicator, lift/lower indicator.
CONTROLS
Single foot-operated traction pedal, foot actuated mow speed limiter, foot actuated service and parking brake. Hand-operated key ignition switch, switch-operated
throttle, isochronous engine speed control, cutting unit raise/lower joystick, cutting unit engage switch, and LED headlight switch, all positioned on right hand
pivoting control console.
ELECTRICAL
Heavy duty 12-volt battery, 570 CCA, 40 amp alternator. Electronic control unit is a microprocessor based, solid state control unit with diagnostic capabilities. Traction
pedal, parking brake, operator presence in seat, and cutting unit engage/disengage safety interlock switches.
REEL DRIVE
Reel drive circuit is split independently for front and rear cutting units. Reel speeds are electronically adjustable in nine incremental settings. On-board backlapping is standard.
SEAT
Deluxe high back suspension seat with fore, aft, height and weight adjustment.
DIMENSIONS
Height: 63” (160 cm) to seat, 85.5” (217.2 cm) to ROPS. Length: 111” (281.9 cm) Wheelbase: 60” (152.4 cm) Operational Width: 116” (288.3 cm) Transport Width:
92” (233.7 cm).
WEIGHT
With 5” cutting units: 2WD – 2,776 lbs. (1,259 kg), 4WD – 2,827 lbs. (1,282 kg). With 7” cutting units: 2WD – 2,907 lbs. (1,319 kg), 4WD – 2,965 lbs. (1,345 kg).
SAFETY / CERTIFICATION
ROPS Standard. Complies with ANSI B71.4-2012, ISO EN 5395 and CE requirements
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
CUTTING UNITS: 5” 8-BLADE: 03621 5” 11-BLADE: 03623 7” 8-BLADE, RADIAL: 03638
7” 8-BLADE, FORWARD-SWEPT: 03639 7” 11-BLADE FORWARD-SWEPT: 03641
TYPE
Five electrically driven, DPA cutting Units with low-drag seal and bearing package. Frame precision manufactured, die-cast aluminum for increased strength, simple
click adjustment maintenance.
SIZE
22” (56 cm) wide, 5” (12.7 cm) or 7” (17.8 cm) diameter.
WIDTH OF CUT
100" (254 cm)
HOC RANGE
0.25”-1.5” (6.4-38.1 mm)
REEL SPEED
Electronically controlled, variable reel speed for optimal clip frequency and independently controlled backlap speed.
BEDKNIFE ADJUSTMENT
Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment.
ROLLERS
Wiehle front roller and standard rear roller included. Optional front full and shoulder rollers, and longer rear rollers available.