PRODUCT DESCRIPTION PRODUCT DESCRIPTION Dimension Watts Lumen Color Temperature Dimension Watts Lumen Color Temperature 20x 28" 16W 1280 48" x24" 30W 2400 24" x32" 20W 1680 48" x30" 32W 2600 24" x 36" 22W 1860 48" x36" 34W 2800 28" x 36 24W 1920 55" x36" 38W 3040 6400K 6400K 30° x 36 25W 2000 60x24" aw 2720 36"% 36 26W 2080 60" x28" 30W 2400 40" x 24° 22W 1760 60x 36" 39W 3120 40" x32" 28W 2240 72x 36" uw 3520 01 02
PRODUCT DESCRIPTION PRODUCT DESCRIPTION PARAMETER SPECIFICATION PARAMETER SPECIFICATION Color Temperature 6400K Safety Compliance uL Option IP Rate 1P54 Input Voltage AC100-120V Output Voltage 12vDC Mirror Glass 5mm CRI 85~90 Ra Wiring Method Hardwired / Plug in Working Temperature 20750.
PRODUCT DESCRIPTION TWO WIRING CONNECTION SOLUTIONS 1.This led light mirror with a thickness not only copper free and lead-free, but also is equipped with three silver and paint layers of protection, which is high quality and environmentally friendly. 2.LED lifetime: hours)Life time is 5 times longer than traditional mirror. 3.This wall mirror combines simple styles and functionality to create a modern home furnishing ideal for use in bathroom, kitchen, bedroom, or any other.
rote: After opening the package, please inspect the product Immediately for damage In transit or missing parts. If there Is any missing, Please contact us. This manual is intent to guide the installation and care instruction.
10.Before installation, please check to make sure the mirror is working properly: After connecting the power, the two round buttons will turn white. At the moment the LED and anti-fog function are already on automatically. You don't need to click the button again. If you don't need to use any one of them, just touch it to turn it off, then the button will turn white. Memory Function : The status of two buttons will have been memorized in the mirror.
Recommended Installation (Pegboard) Sett tapping: SARS X24 Misprision inch XI ie): a nl SHED / iil fission. ibe wll beading to the note: position of fis aluminum strip expand Te.
Ee ee There are three power cords behind the mirror, the LIVE WIRE {L) NEUTRAL WIRE (N) and EARTH WIRE You can connect these wires to a standard switched lighting circuit or to a plug. If you want to connect power wires to plug, you can refer to the steps: » Remove the plug cover by either "snapping" or unscrewing it. + Unscrew the little screws on each of the plug's pins. «+ Insert the twisted copper wires into the holes in the pins. « Tighten the little screw on each of the plug's pins.
