Installation Guide

Questions, problems, missing parts? Before returning to your retailer, call customer service

toll free at 1-888-703-8337, 8 a.m. – 5 p.m., Monday – Friday EST.

TROUBLESHOOTING

(c ) Extend the antenna to its full length and point in the direction of the lighting string for best

results.

(d) If you have a large amount of sets connected together, sometimes you need to try and

operate the remote at the middle of the whole section of connected lighting sets to reduce

the signal space transmission.

** if the product still can’t sync after trying the troubleshooting tasks above, please call

customer service# (if still within the warranty period) **

In case of burned-out bulbs, follow the bulb replacement procedures in the user servicing

instructions

HELPFUL HINTS FOR LIGHT STRINGS WITH DEFECTIVE BULBS OR A SERIES OF BULBS

THAT ARE NOT PERFORMING CORRECTLY:

** Note** before attempting to replace any bulbs on the light string, you must ensure the power is

off and the light string is not connected to a power source. Otherwise, further damage can be

caused to all the bulbs on the lighting string.

1.) Before unplugging, you need to locate the first defective bulb in the series of lights. The

defective bulb typically looks irregular when examined closely and may have an odd twinkling

of flickering lighting effect. Once you have located the defective bulb, replace it with the spare

bulb given in the box. Make sure the bulb adaptor is inserted into the lampholder keeping the

arrow in correct direction, as directed in the instruction manual.

2.) Please note that one defective bulb can cause several or the remaining bulbs along the string

of lights to not work properly. There is an internal signal that passes through bulb 1 through

25 and one malfunctioning bulb prevents the signal to pass through to the additional bulbs.

For example, If bulb 1 through 8 is working correctly and then 9 – 25 is not, it is most likely

that bulb # 8 or #9 is the defective bulb. Start out by replacing bulb #8

to see if the issue can

be resolved. If that is not successful, try replacing bulb # 9., etc. However, please note that

having more then 1 defective bulb in the entire string is very rare.

** If the product still can’t operate properly after trying the troubleshooting tasks above, please

call customer service# (if still within the warranty period) **

UL MODEL #TY-B-25L/1W-C12

FOR INDOOR AND OUTDOOR USE PRINTED IN CHINA

PART

DESCRIPTION

PART #

Regular bulb

Fuse