Specification

Wall-Dog
TM
Powers USA: [phone] or [phone] Canada: [phone] or [phone] www.powers.com 2
SPECIFICATION & DESIGN MANUAL
a1
PERFORMANCE DATA
1/4
3/4
350 1,030 90 260
(6.4)
(
19.1)
(1.6) (4.6) (0.4) (1.2)
1
700 1,070 175 270
(25.4) (3.2) (4.8) (0.8) (1.2)
Anchor
D
iameter
d
in.
(mm)
Ultimate and Allowable Load Capacities for Wall-Dog in Normal-Weight Concrete
1
Tension Shear Tension Shear
lbs. lbs. lbs. lbs.
(kN) (kN) (kN) (kN)
M
inimum Concrete Compressive Strength
f´
c
≥ 4,000 psi (27.6 MPa)
Minimum
E
mbedment
Depth
h
v
in.
(mm)
Ultimate Load Allowable Load
3/4
Center of
––––
400 650
(19.1)
Masonry Unit
(1.8) (2.9)
3/4
T-Joint ––––
350 600
(19.1) (1.6) (2.7)
1
Center of 285 825 305 825 600 900
(25.4)
Masonry Unit
(1.3) (3.7) (1.4) (3.7) (2.7) (4.1)
1
T-Joint
290 915 290 915 380 825
(25.4) (1.3) (4.1) (1.3) (4.1) (1.7) (3.7)
Anchor
Diameter
d
in.
(mm)
1/4
(6.4)
Ultimate Load Capacities for Wall-Dog in Grout-Filled, Hollow Concrete Masonry
and Structural Brick Masonry
1
Tension Shear Tension Shear Tension Shear
lbs. lbs. lbs. lbs. lbs. lbs.
(kN) (kN) (kN) (kN) (kN) (kN)
Grout-Filled
Concrete Masonry
ASTM C 90
Hollow Concrete
Masonry
ASTM C 90
Brick
Masonry
Minimum
Embedment
Depth
h
v
in.
(mm)
Anchor
Location
1. The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 5.0 or greater to determine the allowable working load.
Anchor
Diameter
d
in.
(mm)
1/4
85 245 135 360 255 600
(6.4) (0.4) (1.1) (0.6) (1.6) (1.1) (2.7)
Tension Shear Tension Shear Tension Shear
lbs. lbs. lbs. lbs. lbs. lbs.
(kN) (kN) (kN) (kN) (kN) (kN)
1/2" Wallboard 5/8" Wallboard 3/4" Plywood
1. The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 4.0 or greater to determine the allowable working load.
1. Allowable load capacities listed are calculated using an applied safety factor of 4.0.
1. Allowable load capacities listed are calculated using an applied safety factor of 4.0.
Ultimate Load Capacities for Wall-Dog in Wallboard and Plywood
1
Anchor
Diameter
d
in.
(mm)
1/4
20 60 35 90 65 150
(6.4) (0.1) (0.3) (0.2) (0.4) (0.3) (0.7)
Tension Shear Tension Shear Tension Shear
lbs. lbs. lbs. lbs. lbs. lbs.
(kN) (kN) (kN) (kN) (kN) (kN)
1/2" Wallboard 5/8" Wallboard 3/4" Plywood
Allowable Load Capacities for Wall-Dog in Wallboard and Plywood
1