Manual

78 | P a g e
Table 4165-4 AUX 2 Function (Extracted/Encoded as Aux12Function bits 8-13)
Name
Value
Description
DIVERT DGTL F+
0
Digital Out PWM Battery Diversion (Active High)
DIVERT DGTL F-
1
Digital Out PWM Battery Diversion (Active Low)
BAT DIV V REL+
2
Digital Out PWM Relative to Charge Stage Voltage
Threshold Diversion (Use It Or Lose It) (Active High)
BAT DIV V REL-
3
Digital Out PWM Relative to Charge Stage Voltage
Threshold Diversion (Use It Or Lose It) (Active Low)
TOGGLE TEST
6
Out Once per second On-Off-On-Off automatic toggle
PV IN TRIG +
7
Active High output if Vin exceeds Aux2VoltsHiPv
PV IN TRIG -
8
Active Low output if Vin exceeds Aux2VoltsHiPv
MANUAL ON-OFF
9
MANUAL On/Off allowed using Off-Auto-On Selection
WIND CLIPPER
10
PWM output Active High when V input is above PV input
V plus headroom voltage
NITE LITE HIGH
11
Active High indicating Night Time. Inactive at Wakeup
NITE LITE LOW
12
Active Low indicating Night Time. Inactive at Wakeup
Aux2Function = (Aux12FunctionS & 0x3f00) >> 8; (Digital/Analog Input/Output)
Table 4187-1 EnableFlags bits [4187]
Name
Value
Description
GroundFaultEn
0x0001
Ground Fault Protection Enabled when Set to 1
ArcFaultEn
0x0002
Arc Fault Protection Enabled when Set to 1
RESERVED
0x0004
RESERVED (Do NOT set this bit)
PvPartialShadeEn
0x0008
Partial Shade reporting Enabled when Set to 1
RESERVED
0x0010
RESERVED (Do NOT set this bit)
DefCon3ErrEn
0x0020
DefCon3 Error reporting enabled if set to 1
DefCon4ErrEn
0x0040
DefCon3 Error reporting enabled if set to 1
PwmLowMaxFlag
0x0080
Low Max Enabled if Set to 1 (Low Vin - Vout)
RESERVED
0x0100
RESERVED (Do NOT Set to 1)
RESERVED
0x0200
RESERVED (Do NOT Set to 1)
BumpWindI
0x0400
When adjusting wind curve, automatically ―bumps‖
adjacent current set points out of the way if set to 1
DivrsnAbsEqTmrEn
0x0800
Enables Absorb & EQ timer counting when Aux
functions are diverting if set to 1.
RESERVED
0x1000
RESERVED (Do NOT Set to 1)
RESERVED
0x4000
RESERVED (Do NOT Set to 1)
RESERVED
0x8000
RESERVED (Do NOT Set to 1)