Manual

37 | P a g e

Figure 2.8

Operating the Classic

Once the parameters have been set via the set up wizard or from manual set up, there are no further

requirements to make the Classic function. It is all automatic.

Navigating the Menu's

 Push MAIN MENU

 Push right and left buttons to see the different menus

 To return to the status screen push STATUS button

* To navigate from one end of the main menus to the other end push the top right and left buttons

When the Classic first turns on it will take you through the WIZARD setup. After all of these parameters

are set and saved, you will be placed in the MAIN MENU screen with WIZARD highlighted. Below the

name of the menu is a description of the menu. Pushing the left and right buttons will enable you to see

all the main menus provided. Inside some of these main menus will be sub-menus to adjust the

parameters of the selected feature.

Here is an overview of these menus:

<<WIZARD— CHARGE —MODE—AUX—MISC—LOGS—TWEAKS—TEMPS—NET>>

Below each of the menu names is a row with a description of the menu inside. To enter a menu, the name

of the menu has to be highlighted. Pushing ENTER will show the submenus. The up and down arrow

keys are enabled for easier navigation. Highlighting a sub menu and pushing ENTER will take you inside

Down arrow key

Main Menu

Right arrow key

Right soft key

Up arrow key

Left soft key

Left arrow key

Status screen

Enter button

Current limit

indicator

Speaker

USB activity

indicator

Communication

indicator

description

Screen name

Menu name