Manual

15 | P a g e
plastic knock out covers into any unused knock outs and snap the upper vent cover onto the Classic as
seen in the photo below. Note that the Classic will be slightly de-rated (puts out less power) by sealing
it. Refer to the specifications page of the owner‘s manual for the ratings in the sealed mode. To obtain
the parts necessary to seal the Classic please contact our Technical Support Team. Refer to Figure 1.4
and 1.5
Figure 1.4 Figure 1.5
Network Cable Routing and Installation Guidelines
The Classic uses a 4 conductor phone cable to communicate with other Classic's or other MidNite products. This
cable is a standard 4 conductor phone cable and simply plugs into the jack on the Classic labeled slave. Plug the
other end into the master jack on the second device. There is a plastic clamp located on the circuit board for
routing the network cables above the USB jack so they stay tied down and out of the way. Refer to figure 1.7A
and 1.7B