User manual

Getting Started

Enabling WLAN

The toggles WLAN functionality on the device.

To disable WLAN, short press the

To enable WLAN, short press the

again.

Enabling WPS

WPS is a standard designed to easily setup and automatically configure

secure WLAN networks between two WPS supported devices. If the

client PC supports WPS, the WPS feature can be a user-friendly and

simple process to get your WLAN network up and running.

1. Enable WLAN.

2. Press and hold the

for at least 5 seconds. WPS: Connecting

Device. is displayed.

3. Confirm the WPS option on the client PC trying to connect to the

PR-30. WPS connecting device followed by New device

connected is displayed. If you do not confirm the WPS connection

within 120 seconds, No Device found is displayed and you must

begin the process again.

When WPS is enabled, the screen automatically reverts to the WLAN

Status screen after a period of inactivity when WPS is enabled.

Notifications

If the firmware version on the PR-30 is being updated via the Web

interface, the screen informs the user of the process.

FW updating…