Palapala a ka mea nona

thank you

Have questions?

Visit twelvesouth.com or contact support@twelvesouth.com

BackPack

owner’s guide

It is recommended to secure USB-C hubs with the included

Peripheral Strap or Coated Twist Ties so heavier attached cables

and connections won’t move the hub.

Peripherals can be double stacked on top or even mounted under

the shelf using a combination of the included Coated Twist Ties and

Peripheral Strap.

The BackPack Shelf can be mounted above or below the iMac

(Studio Display) pass-through hole by rotating the Saddle Clip. Just

don’t forget to leave room for the Power Cable to still pass through.

Use the perforations on the BackPack Shelf to secure excess cable

underneath using the included coated twist ties.

Tips and Tricks

PAGE 1
BackPack thank you Tips and Tricks It is recommended to secure USB-C hubs with the included Peripheral Strap or Coated Twist Ties so heavier attached cables and connections won’t move the hub. Peripherals can be double stacked on top or even mounted under the shelf using a combination of the included Coated Twist Ties and Peripheral Strap. The BackPack Shelf can be mounted above or below the iMac (Studio Display) pass-through hole by rotating the Saddle Clip.
PAGE 2
What’s in the Box Installing BackPack ❷ A E B ❶ iMac: Power down your iMac, turn it around so you’re looking at the back, and temporarily remove the power cable with a gentle pull. ❺ Plug the power cable into your iMac (or thread the cable back through the cable hole of your Studio Display), place your accessories on the BackPack, and you’re all set. ❶ Studio Display: Unplug your Studio Display, turn it around so you’re looking at the back, and temporarily thread the power cable through the cable hole.