Operation Manual

USING THE TELEVISION AS A COMPUTER MONITOR

IMPORTANT – Before connecting the computer to the television you must ensure the computer settings are

correct for the television. You MUST do this using your old monitor. Settings and left click on Monitor

How to set up for Windows XP & Windows Vista (connecting via VGA cable to the TV)

1) Switch on your computer

2) When finishing booting up right click your mouse 3) Left click your mouse on Properties/Personalise

anywhere on the screen

4) Left click your mouse on Setting/Display Settings. 5) Left click your mouse on Advance/Advance Settings

Ensure the screen resolution is set to what is shown and left click on Monitor

in the technical specifications section toward the

rear of this user guide. To correct the resolution to

that of the television move the slider.

6) Left click on the drop down for Screen refresh rate and select 60 Hertz, if you experience picture noise or ‘flickering’, select

50 hertz or 70 hertz.

7) Click on Apply, then click Yes and the settings will be saved.

8) Now switch off your computer and connect the

television (as shown)

9) Switch on the TV, select the input/source to VGA/PC and re-start your PC.

Connecting a Laptop

In addition to the above if you are connecting a laptop to the television you will also need to activate the VGA

connection on the laptop. This can vary based on the brand of laptop you have, on many brands/models, it is as per below.

1) Connect the laptop to the television

2) On the Laptop push buttons

The screen will now switch to the television.

IDTV