Operation Manual

SETUP MENU
To access this menu, press [MENU] button on the remote control.
If you wish to make changes to any of the default settings, use the scroll buttons. To confirm any
settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
On Screen Display Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen before disappearing
First Time Installation - Takes you back to the first time installation screen, so you can completely re-tune both Freeview and
analogue
Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a number of different
option to best meet your needs
Blue Screen - Changes the background when there is no input between clear and a blue background (Only available in some
sources)
Reset to default
Reset Menu System - This resets the menus to factory settings.
Reset TV Channels - This clears all the TV channels from the television.
Firmware Upgrade - From time to time we may release new firmware to improve the running of the television (available to
download). This menu lets you upgrade that software onto the television. Further details of how to do this will be issued with
the firmware. Contact the helpline or refer to the ‘product support’ section of the website.
4:3
Displays the 4:3 picture in
its original size. Side bars
are shown to fill the 16:10
screen
Full
Fills the screen, so no
black lines
16:9
Top and bottom bars are
shown to fill the 16:10
screen. 4:3 pictures will be
stretched
Zoom
The picture is the correct
proportion but zoomed in
to fill the screen
Displays the 14:9 picture in
the correct proportion. As a
result side bars are shown
on the screen
Auto
Automatically displays the best picture format. So the
picture is in the correct position. May have black lines
At the top/bottom and/or sides.
18
14:9
Zoom
IDTV