User`s manual

Spec*Edge Version 3.9
June 11, 2008
Setup - 9
2.2.12 Setting the Setup Path:
Figure 4b – Setup File Path
The Setup Path feature of Spec*Edge gives the ability to store the test
settings in a separate file or disk, so in the event that the system is removed from
the computer the test stings can be saved and built from raw engineering data.
Figure 4b shows the Setup path portion of this screen area. This path allows a
technician to setup the settings for a remote PC on the network and “Import” these
settings to the PC that the Spec*Edge scanner is connected. This path also allows
a technician to “Export” these settings to another PC over the network.
Step 1: Click on <Set Path> with the left mouse button. This brings up
the screen shown in Figure 4b
Figure 4c – Select Setup Path Screen
Step 2: Select the desired directory and file name for where the Setup
specification measurement information for all tests is to be
stored. In this case we have elected “C:\SpecEdge\SpecEdge
Setup.ses”.
Step 3: Click on the <Save> button.
2.2.13 Selecting the Language:
Spec*Edge
™
allows you to select the language used for the button and text in
the program. Clicking on the down arrow in the language box allows you to select
that language.