User`s manual

Spec*Edge Version 3.9
June 11, 2008
Setup - 3
Figure 2b – Password Change Screen
Step 3: The operator then enters a desired password two (2) times and
then selects <OK>. This password can is one of the operators
choosing and should be known only to this operator. From this
point on the operator only needs to enter the new password once
in the password screen (Figure 2a) to activate the Setup
Screen shown in Figure 3.
2.2 Entering Test Specifications:
The Setup Screen is where the test is identified with the specifications for
each test. Also from this screen operators are identified, slitter machines, test sheet
count, text and button language, and calibration are established, along with the
database and the test setup file path. The Setup Screen (Figure 3):
Operator
Area
Machine
Area
Files and
Options
Sheet Type
Units
Test Specs
And Areas
Calibration
Figure 3 - Setup Screen