User`s manual

Spec*Edge Version 3.9
June 11, 2008
Forward - ii
please call the Apogee support line at the number on the front cover of the User's
Manual.
Readers of this manual and users of the Spec*Edge
™
program are encouraged
to provide comments, suggestions, and corrections to the manual and the software
directly to Apogee at the address or phone number listed on the cover of this
manual. A Software Problem Report (SPR) form is included at the end of this
manual to facilitate the reporting, tracking, and resolution of problems. Thank you
for choosing Spec*Edge
™
. We assure you that it will continue to be the leading cut
sheet measurement program in the industry.
Microsoft Windows is a registered trademark of Microsoft Corporation. For
purposes of brevity, all references to "Windows" in this manual refer to Microsoft
Windows.
UMAX scanners are registered trademarks of UMAX Corporation.
References to UMAX throughout this manual refer to these registered products.
Access, Excel and FoxPro are registered trademarks of Microsoft Corporation
in the USA and other countries. References to Access, Excel and FoxPro throughout
this manual refer to these registered products.
Lotus and 1-2-3 are registered trademarks of Lotus Development
Corporation. References to Lotus and 1-2-3 throughout this manual refer to these
registered products.
DBase is a registered trademark of Borland International Inc. References to
DBase throughout this manual refer to this registered product.
Unless otherwise noted, all names of companies and products contained
herein are part of a completely fictitious scenario or scenarios and are designed
solely to document the use of an Apogee Systems product.