User`s manual

Spec*Edge Version 3.9
June 11, 2008
Running - 6
Indicates that the pocket (sheet) is
complete. The indicator reflects the
worst condition detected on the
measurements. Clicking with the left
mouse button on the indicator shows
the measurement readings for this
pocket on the measurement panel.
Each measurement may then be
individually analyzed for this pocket.
Buttons:
Su
mmary Button
–
Shows the worst
condition indicated on the OK/Warn/Fail
panel. Clicking on this button brings up the
information summary screen. From this
screen you may elect to print test results.
Scan Button
-
Allows you to scan a new
sample.
Setup Button
–
Allows you to enter Setup.
(See Manual 3).
New Test Button
–
Allows you to start a new
test at any time. Pressing <New Test> will
write all the current information to the
database, if enabled, and clear all current
tests results.
Help Button
-
Allows you to view online help.
Print All Button
–
Allows the operator to
print out all of the results.
Exit Button
-
Allows the operator to exit
Spec*Edge
™
. All current test data will be
written to the database, if enabled, before
exiting.