User`s manual

Spec*Edge Version 3.9
June 11, 2008
Analysis - 12
4.0 Print All Of The Results Of The Test:
The operator may whish to see all of the results at one time. The “Print All”
button does this. This may print out several sheets of analysis depending on the
number of “Pockets” scanned and weather a single edge or a full sheet was scanned.
Print All Button
–
Pressing this button will
print the results of all the samples tested by
sample. Shows the operator the Spec.
Measured result, difference and indicated
condition (OK/Warn/Fail).
5.0 Database:
Spec*Edge
™
automatically saves all summary information to the selected
database file if enabled in the Setup Screen. Each time the operator selects
<Exit> or <New Test>, the summary information is automatically exported to the
selected database file.