User`s manual

Spec*Edge Version 3.9
June 11, 2008
Analysis - 11
3.11 Summary Data: Once the measurement is complete the operator may click
with the left mouse button on the Summary Button on the Operator Screen. This
is the large OK/Warn/Fail button the left of the screen. This brings up the
Summary Screen as shown in Figure 8.
Summary Button
–
Shows the operator the
worst condition indicated on the
OK/Warn/Fail panel. Clicking on this button
brings up the information summary screen
(Figure 8). From this screen the operator
may elect to print individual scan results.
Figure 8 – Summary Screen
From this screen the operator may click with the left mouse button on the
<Print> button. The summary information for that sample will automatically print
on the Windows default printer.