Safety Instructions

EN
9
OPERATION
When you are absolutely sure your air rie is aimed at a safe target and you
are ready to re, put your air rie “OFF SAFE” (see STEP 2. OPERATING THE
SAFETY). Squeeze the trigger.
10A. Unloading a Pellet
Fire the pellet at a SAFE TARGET to unload the airgun. If this is not practical, put
the air rie “ON SAFE”, cock the airgun to open the barrel, and push the pellet
from the chamber by running a cleaning rod through the muzzle end.
10B. Removing a Jammed Pellet
If a pellet is jammed in the barrel, DO NOT reload
the air rie.
1. Cock the air rie (see STEP 3. COCKING
YOUR AIR RIFLE), point the air rie in a SAFE
DIRECTION, put the air rie in the “OFF SAFE”
position and squeeze the trigger to re.
2. Break the barrel open slightly (without pulling
the barrel all the way down to the point that it
cocks) and look down the breech to see if the air
rie is jammed (see illustration 9). NEVER LOOK
DOWN THE MUZZLE.
3. If the air rie is still jammed, with the barrel opened slightly, insert the correct
caliber ramrod into the muzzle and push the jammed pellet out. Do not try to
reuse that pellet. If you are not able to unjam your air rie, contact Umarex USA’s
Service Department.
The Umarex
®
Throttle is equipped with a two
stage adjustable trigger. Turn the adjustment
screw clockwise to decrease the length of the
rst stage travel. Or turn the adjustment screw
counterclockwise to increase the length of
the rst stage travel (see illustration 8). The
adjustment does not change the pull weight.
9. Trouble Shooting
8. Adjusting the Trigger
Breech
Muzzle
Ramrod
Illustration 9
Adjustment screw
Illustration 8
LEAD PELLETS CONTAIN LEAD, A CHEMICAL KNOWN TO
THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM. DO NOT INHALE DUST OR PUT LEAD PELLETS IN MOUTH.
WASH HANDS AFTER HANDLING. KEEP AWAY FROM CHILDREN.
WARNING: