Owner's Manual

STEP 5. Loading Your Airgun

OPERATION

LEAD PELLETS CONTAIN LEAD, A CHEMICAL KNOWN TO

THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER

REPRODUCTIVE HARM. DO NOT INHALE DUST OR PUT LEAD PELLETS IN MOUTH.

WASH HANDS AFTER HANDLING. KEEP AWAY FROM CHILDREN.

WARNING:

UNLOADING A PELLET - The magnetic tip does not extract a pellet. You must shoot

the pellet out into a safe target if available. If a safe target is not available, open bolt,

insert a cleaning rod into the muzzle end and push the pellet out of the barrel.

STEP 6. Unloading Your Airgun

CLOSING THE PUMPING LEVER - Grasp the pumping lever, return it to the

closed position. (illustration 4)

• Make sure the airgun is “ON SAFE” and pointed in a

SAFE DIRECTION.

• Cock the air rie by pulling the bolt back all the way.

The rie should click indicating it is cocked.

(illustration 5a)

• Place a pellet carefully into the feed ramp and let it roll

into the channel of the breech which is exposed when

you cock the air rie. (illustration 5b)

Be sure the pellet skirt is to the rear.

• Push the bolt forward and down to seat the pellet.

(illustration 5c)

Illustration 5a

Illustration 5c

Illustration 5b

NOTE: Many factors affect airgun performance and

velocity, including brand of projectile, lubrication,

barrel condition and temperature.