Owner's Manual

EN
13
Do not return defective or damaged product to the dealer. If your airgun needs
repair, call Umarex USA [phone] and ask for the Service Department
or visit www.umarexusa.com. DO NOT ATTEMPT TO DISASSEMBLE IT!
Your airgun requires special tools and xtures to repair it. Any disassembly or
modication not performed by Umarex USA will void the warranty.
STEP 12. Repair / Service / Warranty
CARE
1 YEAR LIMITED WARRANTY
This product is warranted to the retail consumer for one (1) year from date of
purchase against defects in material and workmanship and is not transferable.
WHAT IS COVERED
Replacement parts and labor.
WHAT IS NOT COVERED
Shipping charges to Umarex USA for defective product and damages caused by
abuse or failure to perform normal maintenance as well as any other expense.
Consequential damages, or incidental expenses, including damage to property.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
WARRANTY CLAIMS
Warranty Claims and Repair for U.S. and Canadian customers only. Call
Umarex USA (479)-646-4210 and ask for the Service Department. If it is
determined a return is necessary, you will be issued a Return Authorization
Number. Write this number boldly on the box and return the product prepaid
to Umarex USA (Canadian customers will be provided with the address of an
authroized Canadian Repair Facility). Your name, address, phone number and
a note explaining the defect found must be included in the package. A copy of
the original dated cash register receipt must accompany the return. U.S.
customers, include a check made to Umarex USA in the amount provided by
Umarex USA’s service department to cover shipping and handling.
IMPLIED WARRANTIES
Any implied warranties, including the implied warranties of merchantability and
tness for a particular purpose, are limited in duration to one (1) year from date
of retail purchase. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS
MAY NOT APPLY TO YOU. TO THE EXTENT ANY PROVISION OF THIS
WARRANTY IS PROHIBITED BY FEDERAL, STATE, OR MUNICIPAL LAW
WHICH CANNOT BE PREEMPTED, IT SHALL NOT BE APPLICABLE.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE AND
COUNTRY TO COUNTRY.
TO VALIDATE THIS WARRANTY–Send in the registration card within 30 days
to: Umarex USA, 7700 Chad Colley Boulevard, Fort Smith, Arkansas 72916
or Register online at www.UmarexUSA.com.
WORKING PARTS: The working parts (pumping lever hinges, trigger hinges, bolt
and the foam wiper on the piston) require very little lubrication. Two(2) drops of
RWS Air Chamber Lube every 1000 shots will sufce. It is easily applied with a 3
1/2” applicator needle (see illustration 10). Remember, a little is good—a lot is
not better.
BARREL: In day to day use, very little dirt or residue will accumulate in the bore.
This can be removed by using RWS Cleaning Pellets. Note: High quality RWS
Lead Pellets not only increase accuracy, they help to reduce lead deposit. During
periods of regular use the bore of the barrel should be cleaned periodically by
means of a felt wad or cleaning rod with wool mop.
SURFACE: The exposed metal parts (rear sights, screw heads, trigger, etc.)
MUST be wiped clean using a slightly oiled cloth after handling to prevent rust.
Use light acid free and resin free oil. RWS Spring Cylinder Oil is excellent for this.