Operating Instructions

9
Put the safety ON SAFE and remove the magazine. Prepare a thin rod with a length of approx.
16 inches. Attach a piece of cotton fabric to its end and clean the barrel with some silicone oil.
CARE AND MAINTENANCE
CAUTION
BARREL CLEANING
Perform routine inspections of the airsoft gun to check for proper operation.
Good care and maintenance of the gun will provide you with many years of pleasant shooting.
OILS THAT CONTAIN ACID OR RESIN CAN DAMAGE SEALS AND POSSIBLY THE FINISH OF
THE STOCK.
CAUTION
The exposed metal parts should be wiped clean using a slightly oiled cloth after handling to
prevent rust. Use light acid free and resin free oil. RWS Spring Cylinder Oil is excellent for this.
1 inch
1/2 inch
• Adjust the hop up to its normal position before cleaning the airsoft gun.
• Do not force the rod into the barrel, as this could cause damage.
• Never drip silicone oil directly into the barrel.
piece of cotton fabric
never attempt to clean the gun without having put
the safety on safe first, remove the magazine anD check the barrel,
it must be clear.
WARNING: