Owner's Manual

EN
9
OPERATION
NOTICE
Valve misalignment will cause excessive gas leak when charging
gas and may result in an inadequate charge.
NOTICE
For best performance, allow your airsoft gun magazine to reach
room temperature before and during use. Rapid firing may cause gas in
magazine to freeze. If this occurs, remove magazine and allow magazine to
warm to room temperature before continuing.
TO REMOVE GAS:
• Hold the magazine at the bottom.
• Press the gas valve.
• Residual gas will now be discharged.
6. Loading and Unloading Projectiles
1. Point the airsoft gun in a SAFE DIRECTION, and press the magazine release.
2. Remove the magazine.
3. Pull down and hold BB Follower.
4. Load BBs and release BB Follower slowly.
5. I nsert the magazine.
0,2
Use .24 caliber (6 mm) plastic BBs only in this airsoft gun.
Use of any other ammunition can cause injury to you or damage to the airsoft
gun.
WARNING
1.
2.
5.
3.
4.
4
3
2
Only use flawless BBs: Never use the following BBs :
1
diameter larger than 6 mm,
2
with edges,
3
both halves not aligned,
4
used, soiled.
Warranty expires if non-recommended BBs are used.
It‘s recommended to use precision BBs from Umarex USA / Elite Force.
To ensure proper operation of the magazine, protect it from dirt and dust.
1
Ø 6 mm
CAUTION