Owner's Manual
EN
5
DESCRIPTION
2. Learning the Parts of Your Airsoft Gun
Rear sight
Slide
Magazine
Trigger
Slide lock lever
Trigger guard
Slide stop lever
Front sight
Magazine release
Muzzle
Trigger safety
BB
Follower
Magazine
Floor Plate
Spring
Retaining
Block
• You and others with you MUST wear shooting glasses to protect your eyes. If
you wear reading glasses the lenses must be certied for impact resistance or
you should wear safety glasses intended for use over normal optical reading
glasses.
• You and others with you should always wear eye and face protection designed
for airsoft guns.
• Always aim in a SAFE DIRECTION. Always keep the muzzle of the airsoft gun
pointed in a SAFE DIRECTION. A SAFE DIRECTION is dened as always
pointing the airsoft gun and/or the muzzle of the airsoft gun in a direction,
in which if it were to discharge, it would not cause any injury or damage.
Controlling where the muzzle or front of the barrel is pointed at all times, is very
important.
• Always keep your nger off the trigger and out of the trigger guard until ready to
shoot.
• Never point the airsoft gun at anything you do not intend to shoot.
• Always treat the airsoft gun as though it is loaded and with the same respect
you would a rearm.
• Never look down the barrel of an airsoft gun.
• Always keep the airsoft gun “ON SAFE” until you are ready to shoot.
• Always check to see if the airsoft gun is unloaded when getting it from another
person or from storage.
• Use .24 caliber (6 mm) plastic BBs only.
• Never reuse ammunition.
• Do not shoot at hard surfaces or at the surface of water. The BB may bounce
off or ricochet and hit someone or something you had not intended to hit.
• Do not shoot at fragile objects such as windows.
• Place the backstop in a location that will be safe should the backstop fail.
• Your backstop should be checked for wear before and after each use. All
backstops are subject to wear and will eventually fail. Replace your backstop if
the surface is worn or damaged or if a ricochet occurs.
• Do not attempt to disassemble or tamper with your airsoft gun. Unauthorized
repairs or modifying the function of your airsoft gun in any way may be unsafe
and will void your warranty.
• Before you store your airsoft gun, make sure it is unloaded and the power
source is removed.
• Always store your airsoft gun in a secure location away from unauthorized
users and separate from ammunition.