Owner's Manual

OPERATION

• Always aim your airsoft gun in a SAFE DIRECTION. When you are sure of

your target and backstop, and the area around the target is clear, squeeze the

trigger to re.

• Always choose your target carefully. Only targets which cannot be completely

penetrated or which will not cause ricochets should be used.

• Your backstop should be checked for wear before and after each use. Replace

your backstop if the surface is worn or damaged, or if a ricochet occurs.

• The airsoft gun is correctly aimed when the front sight blade is positioned

exactly in the notch and even with the rear sight. The top of the front sight

blade should be even with the top of the notch in the rear sight. The bullseye

should appear to rest on the top of the front sight.

FIRE

Pull trigger

Cock the slide by

pulling rearward

and releasing

NOTICE

When all the BBs have been fired, the slide will stay in the rear

position. Press the slide stop lever to let the slide jump forward.

The slide blows back, meaning it shifts

rearward. Keep hands and fingers away

from pinch points.

CAUTION