User's Manual

4.1 Loading Pellets
Make sure the air pistol is "On Safe" (See 2.1).
Point the air pistol in a SAFE DIRECTION.
While keeping the air pistol in a horizontal position (to keep the pellet clip from falling out), open the
slide by pressing the slide release lever down until the slide opens and exposes the breech (Fig. 8).
Remove the pellet clip.
Place a .177 caliber (4.5 mm) pellet, nose first, in each pellet chamber of the pellet clip. (Fig. 9).
IMPORTANT: To avoid jams or deforming the pellets, make sure the pellet skirt is level or slightly below
the rim of the pellet chamber.
Place the pellet clip in the breech (ratchet teeth facing the rear sight) (Fig. 11), keeping the air pistol in the
horizontal position.
4. Loading and Unloading Pellets
Fig. 8
Fig. 11
Use .177 (4.5mm) caliber pellets only in this air pistol. Never reuse pellets. Use
of any other ammunition can cause injury to you or damage to the air pistol.
WARNING:
loading
port
Fig. 9
Fig. 10
redhawk_usa.qxd 05.10.2004 07:26 Seite 7