OPERATING MANUAL Handheld UV Lamps Ultra-Lum, Inc. 1480 N. Claremont Blvd. Claremont, Ca. 91711-3538 www.ultralum.
Table of Contents Section 1 - General Information 1.1 Introduction ............................................................................................................................................4 1.2 Unpacking and Inspection......................................................................................................................5 1.3 Warranty ..............................................................................................................................................
1.0 General Information 1.1 Introduction Thank you for choosing Ultra-Lum, Inc. for your Instrument needs. We strive to build quality into each and every product we manufacture. We all hope that the product purchased meets and exceeds your goals and expectations. Please feel free to contact us with any questions as our knowledgeable sales and customer support staff are ready and willing to work with you. Please refer to the following contact information: Ultra-Lum, Inc. 1480 N. Claremont Blvd.
Unpacking and inspection 1.1.1 Opening the shipping container. 1.1.1.1 1.1.2 Carefully remove the Handheld lamp from the container and place the container aside. 1.1.2.1 1.1.3 Broken lamps. Dented or damaged enclosure. Fractured or cracked filter glass. Anything else that may be considered unacceptable. Ensure that all of the items purchased are included with the shipment. Listed here are the standard items that ship with each unit. 1.1.4.1 1.1.
2.0 Specifications 2.1 Safety Precautions 2.1.1 CAUTION: Dangerous Ultraviolet Radiation 2.1.1.1 2.1.1.2 2.1.1.3 2.1.1.4 2.1.2 CAUTION: Electrical Exposure 2.1.2.1 2.1.2.2 2.1.2.3 2.1.3 Do not attempt to operate the transilluminator with the filter enclosure cover removed as this will expose the user to the HIGH VOLTAGE lamp power supply output circuitry as well as the HIGH VOLTAGE AC main’s circuitry.
2.2 Safety Features 2.2.1 AC Mains Switch 2.2.1.1 2.3 Electrical Ratings 2.3.1 2.3.2 2.3.3 2.4 The AC Mains power switch can be used at any time to turn off and shut down the transilluminator. Single Input AC Line Voltage ..................100VAC, 115VAC, or 230VAC (see ratings label) AC Line Frequency .................................50/60Hz AC Line fuse............................................1A 250 VAC Time Delay Mechanical 2.4.1 4 - Watt Handheld lamps 2.4.1.1 Exterior Dimensions ..........
2.6 Handheld Lamp Controls Defined 1. 2. AC Mains power switch. AC main power switch and Lamp selector for Dual Wave devices 2 1 3.0 Operating Instructions 3.1 Operating the Handheld Ultraviolet Lamps 3.1.1 3.1.2 3.1.3 3.1.4 3.1.5 This device is provided with an adjustable strap to allow the user to hold on to the lamp. The Handheld Lamps have been designed to operate using one of the following Voltages: 100 VAC, 115 VAC, or 230 VAC line from 47 to 63 Hz.
4.0 Care and Maintenance 4.1 Cleaning Recommendations 4.1.1 4.2 Clean all exterior surfaces using a mild non-abrasive cleaner such as glass cleaner with soft paper towels. Lamp replacement 4.2.1 Replacing the lamp(s) requires (1) end panel removal. 4.2.1.1 4.2.1.2 4.2.1.3 4.2.1.4 4.2.1.5 4.2.1.6 4.2.1.7 5.0 Unplug the AC line cord from the wall receptacle. Remove the filter glass by unscrewing the (2) screws located on either side of the unit.
