Unit installation

16
UV lamp operational display panel
To verify that all the UV lamps are operating properly, your UV
treatment unit has been provided with a UV Lamp Operational
Display Panel. The panel consists of as many LED indicators as
there are ultraviolet lamps. Each LED indicator is electrically
connected to the lamp circuitry of a specific UV lamp. The LED
indicators are intended to operate “on” when the UV lamps are
also turned “on”.
Should any UV lamp fail to operate electrically, the corresponding
LED will automatically turn “off”.
Each UV lamp is numbered at the end of the UV treatment chamber,
and the corresponding LED light carries the same number on the
display panel; thus, if one or more LED lights fail to operate, you can
easily determine which specific lamp requires attention.
We recommend you monitor the LED Panel daily to ensure proper
performance.
running time meter
Your ultraviolet treatment unit has been furnished with a Running Time
Meter, located on the front instrument panel. This non-resettable
running time meter will log up to 99,999 hours. It is intended to remind
you of the number of operating hours on the equipment, as certain
maintenance functions need to be performed at certain time intervals.
A maintenance log is attached to the unit for your use. It should be kept
current. This provides an immediate maintenance reference: when it
was performed and when the next service is due. Additional service
logs are available from Aquafine, and are intended to be placed on top
of the existing service logs.
Running Time Meter
UV Lamp Operational Display Panel