Instruction manual

Upstream Instruction Manual
Released on 1-May-14 – R800001Q Page 42 UV Pure Technologies Inc. © 2014
HOLE ON END
OF WIPER SHAFT
MUST BE ON TOP
ALIGN HOLE IN
SHAFT ADAPTER
WITH THE
WIPER SHAFT
Figure 4E
Replacement Parts
Use only genuine UV Pure Technologies’ parts when servicing your Upstream
disinfection system. Failure to use genuine UV Pure Technologies’ replacement
parts will void the factory warranty, and any laboratory validation and/or
certification for water safety and system operating performance. Figure 4B shows
a complete list of original factory parts.
Replacement parts and service are available from your Installer, a Certified
Service Dealer (CSD), or directly from UV Pure Technologies on our e-
commerce site: www.uvpuredirect.com . A complete list of Certified Service
Dealers and their coverage areas is available on UV Pure’s website:
www.uvpure.com .
Manufactured by: UV Pure Technologies Inc.
60 Venture Drive, Unit 6
Toronto, Ontario, Canada, M1B 3S4
Phone: [phone]
Toll Free (USA & CDA) 1-888-407-9997
Fax: [phone]
e-mail inquiries: [e-mail] www.uvpure.com
Date of Purchase:
Dealer Name:
Model: Serial Number:
(S/N located on the left side of the front panel below power cord entry)