Instruction manual

Upstream Instruction Manual
Released on 1-May-14 – R800001Q Page 32 UV Pure Technologies Inc. © 2014
NOTE: Resetting the Lamp Lifetime counter will clear the Message History,
Lamp Starts counter and Power Ups counter. If this information is required,
review it first before proceeding to Step 1.
WING NUT
OR
THUMB
SCREW
UNPLUG
UNIT
TO OPEN
UV LAMP
LAMP
SOCKETS
USE A SCREW
DRIVER TO
PRY LAMP
UP HERE
w
U
V
w
V
U
FACES INFACES OUT
UV
www.uvpure.com
NOTE: DO NOT TWIST/TURN
THE LAMPS WHILE
PINS ARE ENGAGED
Figure 3
Step 1: From the Main Menu, move down to Lamp life remaining screen. Press
Enter to move to next screen to reset counter. Press Enter again and then push