Owner's manual

ManualsBrandsUltravation ManualsConditionersUVS and UVE Fixed Lamp - DC-IH-0215

UVS & UVE FIXED LAMP AIR DISINFECTION SYSTEMS

OWNERS GUIDE

Models: UVS- 1000, 2000, 1036, 2036

Models: UVE- 1000, 2000, 1036, 2036

Table of Contents:

Page 2- Shipping and Packing List, Safety Precautions

Page 3- Installation Steps for fixed Lamps

Page 4- Maintenance, Trouble Shooting

Page 5- Parts Description

Page 6- Replacement Parts, Warranty

LEAVE FOR HOMEOWNER

DC-IH-0215

Summary of content (6 pages)

PAGE 1
UVS & UVE FIXED LAMP AIR DISINFECTION SYSTEMS OWNERS GUIDE Models: UVS- 1000, 2000, 1036, 2036 Models: UVE- 1000, 2000, 1036, 2036 Table of Contents: Page 2- Shipping and Packing List, Safety Precautions Page 3- Installation Steps for fixed Lamps Page 4- Maintenance, Trouble Shooting Page 5- Parts Description Page 6- Replacement Parts, Warranty LEAVE FOR HOMEOWNER DC-IH-0215
PAGE 2
Shipping and Packaging List: • • • • UVS or UVE Electrical Housing 6- ¾ inch 5/16 self tapping sheet metal screws Warning Label Residential Warranty Card UVS- 1000, 1036, 2000, 2036 • 1000 Series- 1 9” or 16” Lamp • 2000 Series- 2 9” or 16” Lamps • UVS hole placement template UVE- 1000, 1036, 2000, 2036 • 1000 Series- One 9” or 16” Lamp • 2000 Series- Two 9” or 16” Lamps • UVE hole placement template Safety Precautions: It is recommended that this unit be installed and maintained by a trained technician:
PAGE 3
Installation Steps for Fixed UVC Units: 1. Determine a suitable location to install unit. Ductwork should be of sufficient strength as to support the unit; otherwise reinforcement of the ductwork may be necessary. Fixed Lamp Installation 2. Find “CUT-OUT-TEMPLATE” supplied with the unit. Place template over ductwork and mark hole location(s). Using a 2” hole saw, cut 2 hole(s) as shown. 3. Lift into place against ductwork. Fasten unit in place with four or six self- tapping screws (supplied).
PAGE 4
Troubleshooting: The Ultravation air disinfection equipment is designed to provide many years of trouble free operation. In the unlikely event of a problem, please contact your local dealer or Ultravation directly. Before calling for service, you should have your Model No; Serial No; Manufacturing Date; If you are troubleshooting the unit, check the following: It is recommended that this unit be installed and maintained by a trained technician.
PAGE 5
PART DESCRIPTIONS: COVER SCREW SERVICE COVER MOUNTING HOLES LAMP STATUS INDICATOR POWER SUPPLY LAMP SOCKET LAMP CONTROL BOARD POWER SWITCH FUSE (UVE-ONLY) UV LAMP POWER CORD/ ELECTRICAL CONNECTION 2 LAMP UVS MODEL SHOWN 5
PAGE 6
Power Consumption and Replacement Part Numbers: Model UVE-1000 UVE-2000 UVE-1036 UVE-2036 UVS-1000 UVS-2000 UVS-1036 UVS-2036 UVS UVE Number of Lamps 1-9 Inch 2-9 Inch 1-16 Inch 2-16 Inch 1-9 Inch 2-9 Inch 1-16 Inch 2-16 Inch Power Consumption 18 Watts 36 Watts 36 Watts 72 Watts 18 Watts 36 Watts 36 Watts 72 Watts Battery 5 Amp Fuse Lamp Replacement Part # LP-PP-0001 LP-PP-0001 LP-PP-0002 LP-PP-0002 LP-PP-0001 LP-PP-0001 LP-PP-0002 LP-PP-0002 EL-PP-0030 EL-PP-0044 Warranty: Ultravation warrants this pro