Specifications

Plugging in power and the telephone line
CAUTION! Do not plug the Uniphone 1000 into any line other than a
standard analog telephone line. If you do, you may damage your
telephone system or the Uniphone 1000. You will also void your
warranty.
SETUP • 9
Installing a battery
Installing a battery (not included) will allow you to use the Uniphone
1000 for 30-45 minutes of normal use during a power outage. Use a 9-
volt alkaline battery. The battery compartment is on the bottom of the
Uniphone 1000. Follow the steps below to install a battery.
8 • SETUP
WARNING! Do not burn or puncture the battery. It could release toxic
material that could injure you. Do not dispose of the battery in
household trash. For information about recycling or proper disposal,
consult your local trash collection or disposal organization.
After you plug in the Uniphone 1000, hold down the key and press
the key. You will see UNIPHONE on the display:
You will see this display when you are not using the Uniphone 1000. It
means the telephone is hung up and TTY mode is off.
On/Off
Shift