Specifications

5
4. Connect the AC adapter.
Plug the AC adapter wire into the "POWER" jack
on the back panel of your TDD Detector.
Plug the AC adapter into an electrical outlet.
5. Press the "RESET" button to initialize the
TDD Detector.
6. Connect an external speaker (optional).
Plug the speaker wire into the RCA phono jack
labeled "SPEAKER" on the back panel of your
TDD Detector.
7. Go on to page 9 to test your installation.
There are two ways to install your TDD Detector
so that it will automatically reset after each call
you receive—off-hook detect and loop-current
detect installations. Either installation makes it
possible for the TDD Detector to know when the
telephone is on or off the hook.
Automatic reset
installation
instructions
Off-hook detect
installation
1. Install the TDD Detector in a place that is
convenient for your operator.
You can place the operator's telephone on top of
the TDD Detector. The operator should be able
to reach the buttons on the front panel easily.
2. Connect the TDD Detector to the phone
line.
If you have a single phone line…
Plug one end of the modular phone wire into
the jack labeled "LINE" on the back panel of
your TDD Detector. Plug the other end of the
phone wire into the telephone line outlet.
If you have either a multi-line (KTS)
telephone system, or a call-director
console…
Connect the TIP and RING for the telephone or
from the call-director console to a telephone
wire with a modular plug that fits a RJ12C
modular jack. Plug the phone wire into the jack
labeled "LINE" on the back panel of your TDD
Detector.