Specifications

USING AN EXTERNAL PRINTER • 87

You can use the LVD connector on the back of the Superprint 4425 to

connect a parallel (Centronics-type) printer instead of the LVD. Follow

these steps to change the printer setting if you use an external printer:

1. Press the options key ( + ). You will see PRINT (UP/LOW)

CASE on the display.

2. Press the key until you see PRINTER (INTERNAL) on the

display.

3. Press the to change the setting to EXTERNAL.

4. Press the key to save the setting and leave options or press the

key to save the setting and go to the next option.

Note: When you change the Printer option to external, the next two

options, Print Size and LVD, will not be displayed because they do not

apply to using an external printer.

Return

Esc

Spacebar

Return

9Ctrl

USING AN

EXTERNAL

PRINTER

APPENDIX