Specifications

Replacing the printer paper
The printer uses high-quality thermal paper. Use the order card that
comes with the Superprint 4425 to order paper or contact your dealer or
Ultratec (the Ultratec address is on the inside front cover of this manual).
Turn the Superprint 4425 on and be sure the printer is on, then follow
these steps to put in a new roll of paper:
74 • CARE & REPAIR
1. Take the printer
cover off by
pushing in on the
back and lifting up.
2. Hold the new roll
so it unrolls from
the bottom.
3. Feed the end of the
roll into the slot in
the back of the
printer.
4. Press the key
a few times until
the paper comes out
of the top of the
printer.
5. Pull the paper up
gently and feed it
through the slot in
the printer cover.
6. Put the roll in the
holder behind the
printer. Replace the
printer cover.
Return