Specifications

11. Unplug the Superprint 4425 and LVD from the wall outlet and refer
servicing to qualified service personnel under the following
conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled into the Superprint 4425 or LVD.
c. If the Superprint 4425 or the LVD has been exposed to rain or
water.
d. If the Superprint 4425 or LVD does not operate normally by
following the operating instructions. Adjust only those controls,
that are covered by the operating instructions because improper
adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the
Superprint 4425 or LVD to normal operation.
e. If the Superprint 4425 or LVD has been dropped and/or damaged.
f. If the Superprint 4425 or LVD exhibits a distinct change in
performance.
12. Do not use the telephone to report a gas leak in the vicinity of the
leak.
13. Ultratec recommends plugging your Superprint 4425 and LVD into a
surge-protected outlet. This will protect the equipment from damage
caused by electrical surges due to lightening or other causes.
Battery safety
Caution: To reduce the risk of fire or injury to persons, read and follow
these instructions:
1. Use only the type and size battery specified in the battery
instructions for your unit.
2. Do not dispose of the batteries in a fire. Cells may explode. Check
local codes for possible special disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be toxic if
swallowed.
4. Exercise care in handling batteries in order not to short them with
conducting materials such as rings, bracelets, and keys. The battery
or conductor may overheat and cause burns.
IMPORTANT SAFETY INSTRUCTIONS • 5