Specifications

Setting pulse dialing +

The Superprint 4425 is set for tone dialing, which is correct for almost

all telephone lines. You can, however, change the setting to pulse dialing

if your line does not accept tone dialing. This setting remains changed

until you change it again or reset the Superprint 4425 or lose power.

Follow these steps to set pulse dialing:

1. Press the options key ( + ). You will see PRINT (UP/LOW)

CASE on the display.

2. Press the key until you see USING (TONE) DIAL on the

display.

3. Press the to change the setting to PULSE.

4. Press the key to save the setting and leave options or press the

key to save the setting and go to the next option.

Setting the number of auto-answer rings

Follow these steps to change the auto-answer rings setting to any number

between 2 and 9 or TS:

1. Press the options key ( + ). You will see PRINT (UP/LOW)

CASE on the display.

2. Press the key until you see AUTO ANSWER RING (2) on the

display.

3. Press the to change the setting to a number between 2 and 9

or TS.

4. Press the key to save the setting and leave options or press the

key to save the setting and go to the next option.

Return

Esc

Spacebar

Return

9Ctrl

Return

Esc

Spacebar

Return

9Ctrl

66 • OPTIONS