Specifications

Turning off the auto-answer
relay voice announcer +
When the Superprint 4425 answers the telephone, it sends out the relay
voice announcer message before it sends your auto-answer memo. If you
do not want the Superprint 4425 to send the message, follow these steps
to turn it off:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2. Press the key until you see AUTO ANSW VOICE (ON) on the
display.
3. Press the to change the setting to OFF.
4. Press the key to leave options.
Clearing auto-answer messages +
Most of the time you will clear messages after you read them, but you
can also clear them by following these steps:
1. Press the clear key ( + ). You will see CLEAR
(CONVERSATION) on the display.
2. Press the to change the setting to AA MESSAGES.
3. Press the key. You will see CLEAR MESSAGES Y/N on the
display.
4. Press the key. You will see MESSAGES CLEARED on the display.
Press the key if you decide not to clear messages.
N
Y
Return
Spacebar
8Ctrl
8Ctrl
Esc
Spacebar
Return
9Ctrl
9Ctrl
AUTO-ANSWER • 47