Specifications

Auto-answer options

Changing to a different auto-answer memo +

You can change to a different auto-answer memo by typing a new memo

name (and contents if necessary) when you turn on auto-answer. Follow

these steps to change your auto-answer memo:

1. Press the auto-answer key ( + ). You will see ANSWER MEMO

and the name of your answer memo on the display.

2. Type a new name and press the key.

3. If the new memo does not already exist, type the contents of the

memo and press the key. Auto-answer is on.

4. If you do not want auto-answer on right away, press the key

again or turn off the Superprint 4425.

Note: An auto-answer memo is the same as any other memo. It is saved

in memo memory and and you will see its name when you read through

the list of memos. See the Memo chapter on pages 51–56 for more

information about memos.

Setting the number of telephone rings +

You can set the Superprint 4425 so that it waits between 2 and 9 rings

before answering, or you can use the TS (Toll Saver) setting. The TS

setting tells the Superprint 4425 to answer after 2 rings if you have

messages or 5 rings if you do not. This saves the cost of a call when you

call from another TTY to read your messages, because you can hang up

after 3 rings. Follow these steps to change the number of rings:

1. Press the options key ( + ).

2. Press the key until the display says auto-answ RINGS (2). The

original setting is 2.

3. Press the to choose a number between 2 and 9 or TS.

4. Press the key to leave options.

Esc

Spacebar

Return

9Ctrl

Esc

Return

Ctrl

46 • AUTO-ANSWER