Specifications

4. Press the key to clear your

auto-answer messages. Press

the key if you decide not to

clear them.

AUTO-ANSWER • 45

Hold down the key and the key to read messages at normal speed.

Keep holding down the key but let go of the key to go faster.

Hold down the key again to return to normal speed. Hold down the

key and the key to read back through messages.

If you do not want to read messages when you turn off auto-answer, you

can do it later. Messages stay in memory until you clear them. The

Superprint 4425 will ask again if you want to read messages the next

time you turn off auto-answer.

Changing the contents of the pre-

programmed auto-answer memo +

You can change what the pre-programmed auto-answer memo says by

following these steps:

1. Press the memo key ( + ). You will see EDIT MEMO on the

display.

2. Type ANSWER and press the key to tell the Superprint 4425

that you want to edit the memo named “Answer.”

3. Press the clear key ( + ). You will see CLEAR CONTENTS Y/N

on the display.

4. Press the key to erase the contents of the memo.

5. Type the new message you want to send as your outgoing auto-

answer message.

6. Press the key to save the new message.

Esc

8Ctrl

Return

6Ctrl

Shift