Specifications

How auto-answer works
The Superprint 4425 answers a call by sending the relay voice announcer
message and the outgoing auto-answer memo.
The relay voice announcer message says, “Please use text telephone or dial
relay.” It also adds a relay number if you have saved one. See Using the
relay voice announcer on page 36 for more information about the
relay voice announcer message.
The auto-answer memo is a short text message which says, “You have
reached an answering machine, please leave a message, GA.” You can
change this message to say anything else you want or you can choose any
of your other memos to use as your out-going auto-answer memo.
If the caller leaves a TTY message, the Superprint 4425 saves the
message, prints it if the printer is on, and adds 1 to the number of
messages. The Superprint 4425 hangs up after 45 seconds of silence.
Note: Auto-answer cannot record voice messages.
About auto-answer memory
Auto-answer memory has enough room for at least 100 short messages.
The only limit to the number of auto-answer messages that can be saved
is the size of auto-answer memory, which is 22,000 characters.
If the memory does fill up, MESSAGE MEMORY FULL is added to the
last message and no more messages are saved. The Superprint 4425 will
still answer the telephone when memory is full if the printer is on. It will
still count messages and print them. If auto-answer memory fills up and
the printer is off, the Superprint 4425 stops answering the telephone.
42 • AUTO-ANSWER