Specifications

Signal light and display

The signal light (and display when you use direct connect) show what is

happening on the telephone line in the following ways:

Signal light Display Telephone line

Steadily on Dial tone

Flashing slowly RINGING Telephone ringing

Flashing quickly BUSY Telephone busy

Flickering Person picking up

telephone or speaking

Dialing tips

You may need to type a 9 or other number to reach an outside line if you

are using the Superprint 4425 in an office. The exact method of dialing

will depend on your local telephone system. Dialing a TTY call should be

the same as dialing a voice call.

Use a comma to put in a one-second pause. For example: 9,222 5555.

For long distance, include a 1 and the area code.

Use an ! for a hook flash. A hook flash is used in a voice mail system or to

transfer a call.

You cannot use * and # with pulse dialing.

Redialing the same number +

Follow these steps to redial the last number you dialed:

1. Press the dial key (hold down the key and press the key).

You will see TYPE NAME, NUM, OR CR on the display.

2. Press the key.

Return

Ctrl

ADVANCED CALLING • 25