Specifications

68 • OPTIONS
Setting relay carrier of choice +
Note: You must turn E-Turbo on before you can set your relay carrier of choice.
Follow these steps to select the long-distance carrier of choice for
your E-Turbo relay calls:
1. Press the options key ( + ). You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see CARRIER displayed.
3. Enter the code of your preferred long distance carrier. If you
do not know the code of your preferred long distance provider,
contact your TRS for the appropriate code to use.
4. Press the key to save the setting and leave options or press
the key to save the setting and go to the next option.
Relay User ID +
Leave the USER ID setting blank unless told otherwise by your
Telecommunications Relay Service.
Note: You must turn E-Turbo on before you can set USER ID.
1. Press the options key ( + ). You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see USER ID displayed.
3. Enter the your User ID.
4. Press the key to save the setting and leave options or press
the key to save the setting and go to the next option.
Turning off Auto ID +
Follow these steps to turn off Auto ID:
1. Press the options key ( + ). You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see AUTO ID (ON) on the
display.
3. Press the to change the setting to OFF.
4. Press the key to save the setting and leave options or press
the key to save the setting and go to the next option.
Return
Esc
Spacebar
Return
9Ctrl
9Ctrl
Return
Esc
Return
9Ctrl
9Ctrl
Return
Esc
Return
9Ctrl
9Ctrl