Specifications

Changing the greeting memo +
Follow these steps to change the memo that the Supercom 4400
sends when you press the greeting key ( + ).
1. Press the options key ( + ). You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see GREET
MEMO>GREETING on the display.
3. Either type in a new name or press the to find the
name of a different memo in the list of memos.
4. Press the key to save the setting.
5. Press the key to leave options.
Saving relay information +
Follow these steps to add relay service telephone numbers to the
relay voice announcer message and to allow for automatic dialing
when you use the relay key ( + ):
1. Press the options key ( + ). You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see EDIT RELAY INFO (NO)
on the display.
3. Press the to change the setting to YES.
4. Press the key. You will see VOICE on the display.
5. Type your relay service voice telephone number that you want
the relay voice announcer to give to callers. Use the
key to correct typing mistakes.
6. Press the key. You will see RELAY VOICE SAVED
briefly displayed.
7. You will see DIAL on the display. Type the telephone number
of your preferred relay service provider. (711 is the default.)
The TTY will automatically dial this number when the relay
key is pressed. Use the key to correct typing
mistakes.
Back Space
Return
Back Space
Return
Spacebar
Return
9Ctrl
2Ctrl
9Ctrl
Esc
Return
Spacebar
Return
9Ctrl
4Ctrl
9Ctrl
OPTIONS • 65